2.0l 16V

  • PDF

Corrado 2.0-16v was in production from March 1992 to June 1995

Four cylinder in line, toothed belt driven DOHC
Alloy cylinder head, cast iron block transversely mounted in front
Bosch K-Jetronic fuel injection
Capacity 1,984cc
Bore 82.5 x 92.8mm
Ouput 136bhp at 5800rpm
Compression Ratio 10.8:1
Maximum Torque 132lb/ft at 4400rpm

Front Wheel Drive
5-Speed 3.40, 2.12, 1.44, 1.12, 0.91:1 (3.78, 2.21, 1.43, 1.03, 0.84:1 from 1992)
Reverse 3.80:1
Final Drive 3.68:1

Front - Independent with MacPherson Struts, lower wishbones, coil sprints and anti-roll bar
Rear - Semi-independent with trailing arms and track correcting bearings, torsion beam, coil springs

Rack and pinion PAS (Power Assisted Steering)
3:17 turns lock to lock

Front 10" (254mm) ventilated front discs
Rear 8.9" (226mm) solid rear discs
ABS standard

Tyres and Wheels:
195/50 VR-15 on 6j x 15" wheels

Track - Front 56.5in (1,435mm)
Track - Rear 56.3in (1,430mm)
Wheelbase 97.2in (2,470mm)
Length 159.4 (4,050mm)
Width 65.7in (1,670mm)
Height 52in (1,320mm)
Unladen Weight 2,423lb (1,100kg)

Top Speed 126mph (203kph) (Source Unknown but further tests do state 134mph)
Acceleration 0-60mph in 10.2 seconds (Further tests state 8.9 seconds)

Fuel Consumption:
Overall 29 to 31mpg (9.1 to 9.7 litres per 100km)

Standard Equipment:
Electric windows, electric & heated mirrors, alloy wheels, ABS, front/rear foglights, sports seats, pop up spoiler, MFA trip computer, tinted glass, central locking, and electric metal sunroof.


Last Updated on Friday, 18 March 2011 11:27

You are here: About the Corrado Models 2.0l 16V